ISO 9001 Standards – Quality Policy and Objectives

ISO 9001 Standards – Quality Policy and Objectives

A ISO 9001 Standards quality policy and its corresponding quality objectives are established to direct the organization towards two specific goals of a quality management system:

-Provision of products – goods and services – that meet customer and applicable legal requirements, and

- Enhancement of customer satisfaction

The quality policy and the objectives are also a means of controlling the quality management system’s processes. Simply, if you want to control a process, assign an objective to it (or more) and make sure it is aligned to the quality policy, then monitor and measure the process’ performance against the assigned objective. You need to provide adequate resources to the process to ensure that it is capable of achieving the objective. You continually improve the whole process by upgrading the objective, make corrective and preventive actions or introduce innovation to it. Corrective action addresses an undesirable situation’s cause in order to prevent its recurrence. Preventive action, by contrast, addresses the probable cause of a potentially undesirable situation. This is what the quality policy and objectives are supposed to do. They provide focus, direction and control.

The quality objectives need to be consistent with the quality policy and the commitment to continual improvement, and their achievement needs to be measurable. The achievement of quality objectives can have a positive impact on product quality, operational effectiveness and financial performance and thus on the satisfaction and confidence of interested parties. When an organization has established a quality policy and a set of operational objectives, this means the only thing left to do is to design or plan the necessary processes or tasks that can realize those objectives. Therefore, the processes determine if the objectives will be met in full, partially or not at all. This is where the ISO 9001 standard play a critical role in specifying the required processes and the operating criteria. This is what ISO 9001 is all about. It even specifies criteria for the policy and the objectives.

A quality policy needs to satisfy the following requirements:

• It is appropriate to the purpose of the organization,
• It includes a commitment to comply with requirements and continually improve the effectiveness of the quality management system,
• It provides a framework for establishing and reviewing quality objectives,
• It is communicated and understood within the organization, and
• It is reviewed for continuing suitability

Quality objectives must be established in order to enable the organization to comply with requirements and continually improve the effectiveness of the quality management system. Quality objectives must achieve four things:

• Enable the organization to meet customer requirements
• Enable the organization to enhance customer satisfaction
• Enable the organization to comply with all legal requirements applicable to the product
• Continually contribute to the effectiveness of the quality management system

Therefore, when you are in the meeting room with your management brainstorming on the appropriate objectives, have these four points in mind.

ISO 9001:2000 requires that management periodically review changes to both the policy and objectives. An organization’s objectives must be measurable and its processes designed to meet those objectives. An organization’s overall business goals, quality objectives and quality policy are all interrelated and must work together to achieve business improvement. To do this, it’s necessary to understand which processes are key to achieving business goals and align those processes with the quality objectives. It means aligning business goals, quality objectives and process measures to create real improvement. And it means using process mapping. Process mapping involves more than just flow charting. Among other things, it can manage and improve processes by illustrating process measures as well as process flows and interactions. One process-mapping method begins by involving the people who work in the process. Another entails mapping the process as is, taking action to improve it and then preparing a final map of the improved process.

Process owners are directly responsible for the attainment of the objectives. They must be given adequate resources, including competent human resources. They need to review the objectives periodically to ensure the key performance indicators are heading towards their objectives on schedule. If not, they need to initiate corrective actions and if the risks of non-achievement are visible, take preventive actions to control them and steer the KPI’s back on course.

Examples of quality objectives:

• Production rejects <>
• Machine breakdown <>
• Returned products = 0/mth
• Purchasing >95% on-time delivery
• Inventory damage = 0/mth

Conclusion: ISO 9001 requires that the quality management system achieves its objectives in order to realize the quality policy.

ISO 9001 Standards Gap Analysis

ISO 9001 Standards Gap Analysis

One of the first steps in implementing ISO 9000 is to perform a gap analysis. This is the technical name for an initial comparison of the Quality Management System to the ISO 9001:2008 Standard. The goal in find the gap between the standard and the QMS. The Gap Analysis will establish the scope of the implementation project and will therefore be important information for determining the amount of resources that will be required to complete the project in the given timeline.
Typically the gap analysis is based on a Gap Analysis checklist. These can be purchased from several different sources on the web ( like theISOstore.com). A second option is to use the internal audit checklist from this web site as a gap analysis checklist. Either way, the key to have a list of questions based on the standard that will uncover any weaknesses in the QMS before the project begins.
Gap Analysis Auditors
Performing gap analysis is best done by someone who is familiar with the ISO 9001 standard. If the company has no one with this experience, then consider outside training for the person who will be the lead internal auditor. Without grasping the goals behind the standard, you and your company can waste a lot of time improperly documenting flaws and over engineering solutions.
Performing a Gap Analysis
I recommend performing a basic ISO 9000 awareness training before the gap analysis. The awareness training will help reduce fear or resistance to the change that sometimes comes with a large company wide project. Once everyone understands the goals of the ISO project and is ready to be audited, start the gap analysis in sections. Covering sections 4,5,6,7 and 8 all in one audit is a mind melting experience. Start with section 4 to see how fast you can properly document the a section. Then schedule the remaining section based on your experience.
As you go through each section, you will either find that a system is already in place that meets the requirements of the ISO9001 standard or you will write a finding for that section. If you find that the system is in place, simply log the document numbers on the gap analysis sheet and move on. If you find that a large portions of the quality systems are missing, then you can write the equivalent of a major finding with a larger scope and not waste too much time listing every detail of what is missing.
How to use the result of the gap analysis
Once you have completed the gap analysis, you will have a list of missing or under-developed documents, records and systems. If you use the checklist from this web site, the result of the gap analysis will be a list of individual item that must be corrected. If the check sheet said “what document is used to the describe record retention?” and you found no document, then the document should be created. Once you feel that everything is in place, then you will want to repeat the audit to confirm that you can answer every question on the internal audit checklist with a positive response.
If the gap analysis show that your systems are in relatively good shape with some area for improvement, then I would make the gap analysis the first record in your internal audit notebook. This will help build a history of audits. If the gap analysis shows major flaws, you may want to fix them and then perform an internal audit as the first record to meet your internal auditing requirements. External auditor will frequently look at your internal auditing records to see if there are any blatant problems with the QMS, so don’t make their job too easy.

ISO 9001 Standards Gap Analysis

ISO 9001 Standards Gap Analysis

One of the first steps in implementing ISO 9000 is to perform a gap analysis. This is the technical name for an initial comparison of the Quality Management System to the ISO 9001:2008 Standard. The goal in find the gap between the standard and the QMS. The Gap Analysis will establish the scope of the implementation project and will therefore be important information for determining the amount of resources that will be required to complete the project in the given timeline.
Typically the gap analysis is based on a Gap Analysis checklist. These can be purchased from several different sources on the web ( like theISOstore.com). A second option is to use the internal audit checklist from this web site as a gap analysis checklist. Either way, the key to have a list of questions based on the standard that will uncover any weaknesses in the QMS before the project begins.
Gap Analysis Auditors
Performing gap analysis is best done by someone who is familiar with the ISO 9001 standard. If the company has no one with this experience, then consider outside training for the person who will be the lead internal auditor. Without grasping the goals behind the standard, you and your company can waste a lot of time improperly documenting flaws and over engineering solutions.
Performing a Gap Analysis
I recommend performing a basic ISO 9000 awareness training before the gap analysis. The awareness training will help reduce fear or resistance to the change that sometimes comes with a large company wide project. Once everyone understands the goals of the ISO project and is ready to be audited, start the gap analysis in sections. Covering sections 4,5,6,7 and 8 all in one audit is a mind melting experience. Start with section 4 to see how fast you can properly document the a section. Then schedule the remaining section based on your experience.
As you go through each section, you will either find that a system is already in place that meets the requirements of the ISO9001 standard or you will write a finding for that section. If you find that the system is in place, simply log the document numbers on the gap analysis sheet and move on. If you find that a large portions of the quality systems are missing, then you can write the equivalent of a major finding with a larger scope and not waste too much time listing every detail of what is missing.
How to use the result of the gap analysis
Once you have completed the gap analysis, you will have a list of missing or under-developed documents, records and systems. If you use the checklist from this web site, the result of the gap analysis will be a list of individual item that must be corrected. If the check sheet said “what document is used to the describe record retention?” and you found no document, then the document should be created. Once you feel that everything is in place, then you will want to repeat the audit to confirm that you can answer every question on the internal audit checklist with a positive response.
If the gap analysis show that your systems are in relatively good shape with some area for improvement, then I would make the gap analysis the first record in your internal audit notebook. This will help build a history of audits. If the gap analysis shows major flaws, you may want to fix them and then perform an internal audit as the first record to meet your internal auditing requirements. External auditor will frequently look at your internal auditing records to see if there are any blatant problems with the QMS, so don’t make their job too easy.

ISO 9001 Standards Training DVD

The major reasons that company leadership or management decides to seek ISO 9001 certification are to gain continued or increased business and to maintain effective operations.
A company can maintain a relationship with customers, as well as get increased business through complying to the ISO 9001 standards or becoming certified. This comes from satisfying customer demands, the desire for European business, and to advertise.

The Introduction to ISO 9001:2008 DVD covers 3 major areas, which will help companies in the process of implementing ISO 9000 Standards. It consists of:

First, to describe some basic information on ISO 9001 Standards. It will specifically refer to ISO 9001:2008 Standards. The video will explained on topic like what is ISO 9000 Standards, The origin, history & evolution, Series of ISO 9001, version & certification in ISO 9000 Standards.

Then, the DVD will go into the introduction on quality management. It will explained on topics like what is quality, quality characteristic, quality management, Quality Management Principles, ISO 9001 vs. Quality, what is Quality Management System & etc.

Finally, the DVD will technically highlight the requirement of Quality Management System in ISO 9001:2008. It also going through in details the steps in implementing Quality Management System in ISO 9001:2008.

ISO 9001 Standards Training DVD

The major reasons that company leadership or management decides to seek ISO 9001 certification are to gain continued or increased business and to maintain effective operations.
A company can maintain a relationship with customers, as well as get increased business through complying to the ISO 9001 standards or becoming certified. This comes from satisfying customer demands, the desire for European business, and to advertise.

The Introduction to ISO 9001:2008 DVD covers 3 major areas, which will help companies in the process of implementing ISO 9000 Standards. It consists of:

First, to describe some basic information on ISO 9001 Standards. It will specifically refer to ISO 9001:2008 Standards. The video will explained on topic like what is ISO 9000 Standards, The origin, history & evolution, Series of ISO 9001, version & certification in ISO 9000 Standards.

Then, the DVD will go into the introduction on quality management. It will explained on topics like what is quality, quality characteristic, quality management, Quality Management Principles, ISO 9001 vs. Quality, what is Quality Management System & etc.

Finally, the DVD will technically highlight the requirement of Quality Management System in ISO 9001:2008. It also going through in details the steps in implementing Quality Management System in ISO 9001:2008.

IMPLEMENTATION OF ISO 9001 STANDARD IN EDUCATION

IMPLEMENTATION OF ISO 9001 STANDARD IN EDUCATION

The economy has already met with various endeavours and concepts to build an effective quality management system. From the historical point of view, the most important ones are Deming Prize (1950), followed by Malcom Baldrige National Award (1987) and

international standards pertaining to ISO 9000 (1987) family. The implementation of this last standard grows continuously, either in Europe or in the world. In the period from 2001 to 2003, there was a slight stagnation, which was the consequence of the organisations having to adapt to the requests of ISO 9001:2000 edition of the standard. Croatia also actively participates in this trend, which show that at the end of 2004, organisations were certified, of which 970 of them were from Croatia.

The economy has already met with various endeavours and concepts to build aneffective quality management system. From the historical point of view, the most importantones are Deming Prize (1950), followed by Malcom Baldrige National Award (1987) andinternational standards pertaining to ISO 9000 (1987) family. The implementation of thislast standard grows continuously, either in Europe or in the world, as shown in the picture1. In the period from 2001 to 2003, there was a slight stagnation, which was theconsequence of the organisations having to adapt to the requests of ISO 9001:2008 editionof the standard. Croatia also actively participates in this trend, as illustrated by figures fromthe table 2, which show that at the end of 2004, 670,399 organisations were certified, ofwhich 970 of them were from Croatia.

The implementation of the stated standard in educational activities took a somewhat slower pace. Trends in Croatia do not completely follow the World ones . The 2002 and 2003 stagnation, which, as already mentioned, was mainly caused by transfer from one issue of the standard to the next one, had no particular impact to Croatia, partially because the data for Croatia includes standards from both the previous and the new issue of the ISO 9001 standard.

IMPLEMENTATION OF ISO 9001 STANDARD IN EDUCATION

IMPLEMENTATION OF ISO 9001 STANDARD IN EDUCATION

The economy has already met with various endeavours and concepts to build an effective quality management system. From the historical point of view, the most important ones are Deming Prize (1950), followed by Malcom Baldrige National Award (1987) and

international standards pertaining to ISO 9000 (1987) family. The implementation of this last standard grows continuously, either in Europe or in the world. In the period from 2001 to 2003, there was a slight stagnation, which was the consequence of the organisations having to adapt to the requests of ISO 9001:2000 edition of the standard. Croatia also actively participates in this trend, which show that at the end of 2004, organisations were certified, of which 970 of them were from Croatia.

The economy has already met with various endeavours and concepts to build aneffective quality management system. From the historical point of view, the most importantones are Deming Prize (1950), followed by Malcom Baldrige National Award (1987) andinternational standards pertaining to ISO 9000 (1987) family. The implementation of thislast standard grows continuously, either in Europe or in the world, as shown in the picture1. In the period from 2001 to 2003, there was a slight stagnation, which was theconsequence of the organisations having to adapt to the requests of ISO 9001:2008 editionof the standard. Croatia also actively participates in this trend, as illustrated by figures fromthe table 2, which show that at the end of 2004, 670,399 organisations were certified, ofwhich 970 of them were from Croatia.

The implementation of the stated standard in educational activities took a somewhat slower pace. Trends in Croatia do not completely follow the World ones . The 2002 and 2003 stagnation, which, as already mentioned, was mainly caused by transfer from one issue of the standard to the next one, had no particular impact to Croatia, partially because the data for Croatia includes standards from both the previous and the new issue of the ISO 9001 standard.